北京赛车PK10计划

济南震辉保温材料有限公司
地址:章丘工业园
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:ejointrans.com
当前位置:北京赛车PK10计划 - 新闻动态
新闻动态
挤塑板施工时应该怎么修复漏洞?
作者:admin 来源:本站 发布时间:2019-11-14 11:12:24 浏览次数:259
  挤压板的施工过程中,经常遇到洞在墙上,影响正常施工的影响挤压板,所以我们需要修复这个洞,所以在粘贴挤压板,我们应该如何修复漏洞,施工效果的挤压板不会影响吗?
In the construction process of extrusion plate, there are often holes on the wall that affect the normal construction of extrusion plate, so we need to repair this hole, so when pasting extrusion plate, how should we repair the holes? Will the construction effect of extrusion plate not be affected?
1)脚手架拆除后,应及时修补洞口。墙壁上的孔洞用相同的基本墙体材料填充,并用1:3的水泥砂浆抹平。
1) after the scaffold is removed, the hole shall be repaired in time. Holes in walls shall be filled with the same basic wall material and trowelled with 1:3 cement mortar.
2)将挤出板按孔的大小进行切割,并对边缘部分进行抛光处理,使其紧密密封并填充孔内。并在挤出板的两侧刷上界面剂。
2) cut the extrusion plate according to the size of the hole, and polish the edge part to make it tightly sealed and fill the hole. And brush the interfacial agent on both sides of the extrusion plate.
3)孔内水泥砂浆凝固后,在挤出板背面涂上10厚的专用粘结剂,将挤出板挤入孔内,注意不要将专用粘结剂涂抹在四周边缘。

北京赛车PK10计划 3) after the cement mortar in the hole solidifies, apply 10 thick special adhesive on the back of the extrusion plate, squeeze the extrusion plate into the hole, and pay attention not to apply the special adhesive on the surrounding edge.

4)切割区域可覆盖整个修复区域的网格布大小,并与周围的网格布重叠80。
4) the cutting area can cover the mesh size of the whole repair area, and overlap 80 with the surrounding mesh.
5)下垫聚合物砂浆,嵌入网布进行修补。表面不接触时,按周围区域的厚度涂抹表面聚合物砂浆。
5) the polymer mortar shall be padded and embedded in the mesh for repair. When the surface is not in contact, apply the surface polymer mortar according to the thickness of the surrounding area.
6)用湿毛刷将新旧不平的表面刷平,将孔的边缘磨平。
6) brush the new and old uneven surfaces with a wet brush, and polish the edge of the hole.
以上就是今天的介绍,如果您想了解多关于我公司产品的信息,欢迎您电话咨询,我们将为您提供详细的产品信息。
The above is today's introduction. If you want to know more about our products, you are welcome to call us for consultation. We will provide you with detailed product information.