北京赛车PK10计划

济南震辉保温材料有限公司
地址:章丘工业园
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:ejointrans.com
当前位置:北京赛车PK10计划 - 新闻动态
新闻动态
粘贴挤塑板要注意一下几个点!
作者:admin 来源:本站 发布时间:2019-10-29 16:49:42 浏览次数:183
  挤塑板是一种绿色环保的绝缘材料,具有优良的保温性能,高强度抗压强度,优异的防腐性能等特点,很多客户会选择挤塑板在家居装饰中,但小编在这里提醒你粘贴挤塑板,需要注意以下几点:
Extruded board is a kind of green and environmental protection insulating material, with excellent heat preservation performance, high strength and compressive strength, excellent corrosion resistance and other characteristics. Many customers will choose extruded board in home decoration, but small braid here reminds you to paste extruded board, which needs to pay attention to the following points:
1. 施工前应准备好挤压板的布置图,节约材料,加快施工进度。
1. Before construction, the layout of extrusion plate shall be prepared to save materials and speed up the construction progress.
2. 待某一基底面处理完毕后,指定该底板为模型底板,进行模型底板的施工。
2. After a certain base surface is processed, the base plate is designated as the model base plate for the construction of the model base plate.
三、用点法涂布聚合物砂浆挤出板时必须立即贴在墙面上,速度要快。
3. When the polymer mortar extrusion plate is coated with point method, it must be pasted on the wall immediately, with fast speed.
四、按预先布置的尺寸裁切挤出板,从墙角处垂直错缝连接,墙角处沿建筑物全高笔直,完整。
IV. cut the extrusion plate according to the pre arranged size, and connect vertically from the corner of the wall. The corner of the wall is straight and complete along the full height of the building.
5. 用浮子将50mm宽的特种聚合物胶浆涂在每个挤压板的外围,从边缘到中间逐渐加厚。

5. Apply 50mm wide special polymer mortar on the periphery of each extrusion plate with float, and gradually thicken from the edge to the middle.

六、挤塑板粘贴时,板缝要压紧,相邻板要齐平。施工时控制板之间的间隙不得大于2m。
Vi. when the extruded board is pasted, the board joints shall be pressed tightly, and the adjacent boards shall be flush. During construction, the gap between control boards shall not be more than 2m.
7. 将挤出板按上述要求贴壁后,应反复用2m尺压平,确保其平整度及粘接牢固。
7. After sticking the extruded plate to the wall according to the above requirements, it shall be repeatedly flattened with a 2m ruler to ensure its flatness and firm adhesion.
八、在门窗口的挤出板上,不准用碎板拼合,用整块板剪断。
VIII. On the Extrusion board of the door and window, it is not allowed to use the broken board for splicing, and use the whole board for cutting.
九、挤出板应粘贴牢固,不得游离滚筒而松动。
IX. the extrusion plate shall be firmly pasted and shall not be loose due to free roller.
十、为了防止外墙渗漏,需要在围绕窗孔的侧壁挤压板与辅助框架之间留有缝隙。
X. in order to prevent the leakage of the external wall, a gap shall be left between the side wall extrusion plate surrounding the window hole and the auxiliary frame.
十一、在窗洞位置之间的板搭接缝要考虑防水问题。有关挤出板的多信息,请访问我们的网站:http://ejointrans.com
Xi. The waterproof problem shall be considered for the slab joint between window openings. For more information about extrusion plates, please visit our website: http://ejointrans.com
var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = "https://hm.baidu.com/hm.js?be055eb5acfdc25d3bd72279b8418725"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();